Reader Comments

How to install a rain barrel to save money and help save the planet

by Temeka Nesbit (2020-07-16)

id="article-body" class="row" section="article-body">

Approximately 30% of U.S. household water use goes toward outdoor purposes like irrigation or car washing. Cutting back on that usage from your local water system can cut down on local pollution and save a little money off your water bill. One way to get your water supply off the grid: Set up a rain barrel. It's easy and economical, and it won't take more than a few hours of work.  There are a few ways to go about setting up a rain barrel, and you'll need to think about the specific circumstances in your yard, as well as how you intend to use the water. Here are a few important things to consider. Read more: Go greener with these cool eco-friendly products in 2020A 55-gallon drum like this one will do the trick.
Chance Lane/CNET
Barrel of rainDespite the image that might pop into your head when you hear the term "rain barrel," you don't technically have to use a wooden barrel to gather rainwater. A trash can, a drum or a bucket would work fine. The container can either be closed or open at the top, but if you go with an open container to catch rain directly as it falls, make sure to cover any openings with a mesh screen (1.2 mm or smaller) to avoid creating a mosquito breeding ground. If your container is transparent, paint it or wrap it with a covering to discourage algae growth.  img-20200427-124612961Painting your barrel a dark color helps keep out algae-promoting sunlight.
Chance Lane/CNET
55-gallon drums are a popular choice for rain barrels, and you can purchase one new from Before we get into getting water into your barrel, again, the first thing you should do is make sure whatever you're using as a rain barrel is opaque. The plastic drums you'll find out there are often bright blue. That would stand out a little too much in most residential yards. I'd also feel better about keeping it sealed off from the sun if it was a darker color. I painted mine using exterior spray paint and primer. If you're using a container that has any transparency, you want to paint or wrap the drum with something to prevent organic growth inside.  img-20200427-122923418Except for the barrel and a power drill, the EarthMinded DIY Rain Barrel converter kit comes with everything you need to connect your downspout to a rain barrel.
Chance Lane/CNET
Catch all thisA catchment area is a space that catches water. In this case, I decided that I wanted to connect to our gutter system, using a section of the roof as a catchment. This is a pretty common method, but not required. If you need to put your rain barrel in a remote area away from your house, you could create a catchment using a tarp. You could also go without an expanded catchment, and just leave a barrel out in an open area to capture the rainfall directly. Keep in mind, the larger the catchment, the more rain you'll catch. If, like me, you want to connect your barrel to your gutter system, there are two ways to do this: an open connection or a closed connection.  An open connection is easy enough: Put the opening of your container directly underneath the end of your downspout. Downspouts often run down the wall and terminate near the ground, so you may need to cut a section of the downspout away to achieve this.  img-20200427-151855557If you're using a closed barrel, you'll need to connect it to a water source. The kit I used includes this piece of flexible tubing to go from downspout to barrel. Should you have any questions relating to in which along with how you can utilize , you can email us in the website.  
Chance Lane/CNET
With an open connection, you have a few other things to consider. First, mosquitoes. As mentioned earlier, any opening will need to be covered with a screen to deter mosquitoes from laying eggs in the container. Attaching a screen isn't very difficult. Purchase a sheet or a roll of it at your local hardware store and staple it in place. A screen will also mean you need to worry about that screen getting clogged with debris. Just keep an eye on it and clear off as needed, especially if your rain barrel is situated near trees that drop leaves or other vegetative matter.  If you go with a closed connection, it removes the need for a screen. The downspout is plumbed to the barrel with a watertight connection. The other thing you'll need to consider is overflow. Once the container is full, incoming water has to go somewhere. In my case, it would overflow right onto my deck, causing damage. If you want, you can run an overflow line from the top of the container to safely channel the excess water elsewhere. Even a large barrel can fill up overnight after a strong downpour, so you'll want to take overflow seriously.  img-20200427-161556183Your downspout is a great source of water for a rain barrel, but you'll most likely need to cut a hole in it.
Chance Lane/CNET
Come togetherI initially wanted to design and build the barrel with an assortment of parts from the local home improvement store -- this seemed like it should have been easy enough. But after a few trips to the store, I couldn't figure out an elegant way to create the downspout connection I had imagined, and I ended up with a cart full of adapters and transitions.  Instead I went with the

CNET Smart Home

Smart Home

Notification on
Notification off

How to